Using visibility analysis to improve point density and processing time of SfM-MVS techniques for 3D reconstruction of landforms     

Álvaro Gómez-Gutiérrez  Trent Biggs  Napoleon Gudino-Elizondo  Paz Errea  Esteban Alonso-González  Estela Nadal Romero  José Juan de Sanjosé Blasco 《地球表面变化过程与地形》2020,45(11):2524-2539

Image network geometry, including the number and orientation of images, impacts the error, coverage, and processing time of 3D terrain mapping performed using structure-from-motion and multiview-stereo (SfM-MVS). Few studies have quantified trade-offs in error and processing time or ways to optimize image acquisition in diverse topographic conditions. Here, we determine suitable camera locations for image acquisition by minimizing the occlusion produced by topography. Viewshed analysis is used to select the suitable images, which requires a preliminary digital elevation model (DEM), potential camera locations, and sensor parameters. One aerial and two ground-based image collections were used to analyse differences between SfM-MVS models produced using: (1) all available images (ALL); (2) images selected using conventional methods (CON); and (3) images selected using the viewshed analysis (VIEW). The resulting models were compared with benchmark point clouds acquired by a terrestrial laser scanner (TLS) and TLS-derived DEMs. The VIEW datasets produced denser point clouds (28–32% more points) and DEMs with up to 66% reduction in error compared with CON datasets due to reduction of gaps in the DEM. VIEW datasets reduced processing time by 37–76% compared with ALL, with no reduction in coverage or increase in error. DEMs produced with ALL and VIEW datasets had similar slope and roughness, while slight differences that may be locally important were observed for the CON dataset. The new method helps optimize SfM-MVS image collection strategies that significantly reduce the number of images required with minimal loss in coverage or accuracy over complex surfaces. © 2020 John Wiley & Sons, Ltd.  相似文献   

Google Earth Engine平台支持下的赣南柑橘果园遥感提取研究   总被引：1，自引：0，他引：1  

徐晗泽宇  刘冲  王军邦  齐述华 《地球信息科学学报》2018,20(3):396-404

赣南地区是中国柑橘主产区,柑橘种植产业经数十年发展已具较大规模。本文利用Google Earth Engine平台,使用2140景Landsat影像进行像元级融合,重构目标年份季节最小云量影像集,构建多维分类特征集,利用随机森林分类算法,实现了1990、1995、2000、2005、2010和2016年赣南柑橘果园的分布制图。结果表明：利用Google Earth Engine平台可实现大量遥感影像数据的高效处理;最小云量影像合成方法能够有效解决多云多雨地区高质量光学影像获取困难的问题;以最小云量影像合成构建的数据集,使用随机森林分类算法能够有效提取赣南柑橘果园,分类平均总体精度和Kappa系数分别为93.15%和0.90,分类效果良好;赣南柑橘果园面积由1990年9.77 km²扩大为2016年2200.34 km²,2005年以后呈大规模扩张趋势,果园分布由零星分布,逐步形成连片化的聚集分布特点,柑橘果园用地的主要来源为林地、灌丛和耕地。  相似文献   

华北克拉通地壳结构及动力学机制分析   总被引：1，自引：0，他引：1       下载免费PDF全文

武岩  丁志峰  王兴臣  朱露培 《地球物理学报》2018,61(7):2705-2718

本文对布设在华北克拉通三个陆块的199个宽频带台站记录的远震数据进行了接收函数计算.利用H-κ迭代方法获得了该区域基岩地区的地壳结构，平滑处理后作为背景结构模型中的基岩地区地壳结构；利用相邻算法对沉积层地区的接收函数进行了波形拟合计算，获得了沉积层结构，平滑后作为背景结构模型中的沉积层结构；结合前人的研究成果，完善了研究区域的背景结构模型.以此模型为基础，对接收函数进行了CCP（Common Conversion Point，共转换点）叠加成像，获得了Moho面成像结果，对比沉积层的成像结果发现：西部陆块中鄂尔多斯块体东部地区地壳厚度较大，约为42 km，泊松比较低，小于0.24，为长英质含量较多的地壳层；位于中部陆块的山西地堑地壳厚度小于鄂尔多斯块体，且变化较大，西侧地壳厚度约为40 km，东侧重力梯度带附近地壳厚度迅速减薄至36 km左右，张家口-怀来-大同一带出现了地壳的局部抬升，地壳厚度等值线基本以北北东方向为主，与构造带方向基本一致，地堑内泊松比约为0.26~0.28，前人对此区域的层析成像研究结果表明太行山隆起和阴山隆起存在壳内低速层，推测为地壳部分熔融以及上地幔物质上涌造成的；东部陆块中渤海湾盆地的地壳厚度较薄，约为32 km，部分地区小于30 km，其中冀中坳陷带地壳厚度最薄，约为28 km，沉积层基底分布与Moho面分布呈镜像对称趋势，沉积层较厚地区的地壳较薄，推测东部陆块在太平洋板块俯冲作用下，存在北西-南东向的拉张作用，使其内发育了大量断陷盆地.  相似文献   

Extracting drainage networks and their connectivity using LiDAR data          下载免费PDF全文

Jennifer Roelens  Ine Rosier  Stefaan Dondeyne  Jos Van Orshoven  Jan Diels 《水文研究》2018,32(8):1026-1037

Policies, measures, and models geared towards flood prevention and managing surface waters benefit from high quality data on the presence and characteristics of drainage ditches. As a cost and labour effective alternative for acquiring such data through field surveys, we propose a method (a) to extract vector data representing ditch drainage networks based on local morphologic features derived from high resolution digital elevation models (DEM) and (b) to identify possible connections in the ditch network by calculating a probability of the connectivity using a logistic regression where the predictor variables are characteristics of the ditch centre lines or derived from the DEM. Using Light Detection and Ranging (LiDAR) derived DEMs with a 1 m resolution, the method was developed and tested for a mixed agricultural residential area in north‐eastern Belgium. The derived ditch segments had an error of omission of 8% and an error of commission of 5%. The original positional accuracy of the centre lines of the extracted ditches was 0.6 m and could be improved to 0.4 m by shifting each vertex to the position of the lowest LiDAR point located within a radius equal to the spatial resolution of the used DEM. About 69% of the false disconnections in the network were identified and corrected leading to a reduction of the unconnected parts of the ditch network by 71%. The extracted and connected network approximated the reference ditch network fairly well.  相似文献   

A method for uncertainty constraint of catchment discharge and phosphorus load estimates          下载免费PDF全文

Michael J. Hollaway  Keith J. Beven  Clare Mc W. H. Benskin  Adrian L. Collins  Robert Evans  Peter D. Falloon  Kirsty J. Forber  Kevin M. Hiscock  Ron Kahana  Christopher J. A. Macleod  Mary C. Ockenden  Martha L. Villamizar  Catherine Wearing  Paul J. A. Withers  Jian G. Zhou  Nicholas J. Barber  Philip M. Haygarth 《水文研究》2018,32(17):2779-2787

River discharge and nutrient measurements are subject to aleatory and epistemic uncertainties. In this study, we present a novel method for estimating these uncertainties in colocated discharge and phosphorus (P) measurements. The “voting point”‐based method constrains the derived stage‐discharge rating curve both on the fit to available gaugings and to the catchment water balance. This helps reduce the uncertainty beyond the range of available gaugings and during out of bank situations. In the example presented here, for the top 5% of flows, uncertainties are shown to be 139% using a traditional power law fit, compared with 40% when using our updated “voting point” method. Furthermore, the method is extended to in situ and lab analysed nutrient concentration data pairings, with lower uncertainties (81%) shown for high concentrations (top 5%) than when a traditional regression is applied (102%). Overall, for both discharge and nutrient data, the method presented goes some way to accounting for epistemic uncertainties associated with nonstationary physical characteristics of the monitoring site.  相似文献   

基于圆柱多段拟合的隧道中轴线提取方法研究     

荆海峰  李广云  王力  杨文锋 《大地测量与地球动力学》2018,38(2):211-215

提出基于圆柱多段拟合的隧道中轴线提取方法。首先对隧道点云数据进行预处理，并将点云按隧道走向分成不同区段；然后对各区段依据轴线与表面点云法线垂直关系，提取精度较低的中轴线；最后对各区段利用圆柱多段拟合，提取精度较高的中轴线。实验表明，隧道中轴线的提取在一定的采样区间具有较高的稳定性，对直线和弯曲的圆形隧道有良好的适用性，算法可靠，精度较高。  相似文献   

关于地震科学实验场的一些思考——地下云图     

陈颙  徐逸鹤  蔡辉腾  李稳 《中国地震》2018,34(2):165-171

由中国地震局和美国国家科学基金委、地质调查局合作建立的地震预报研究实验场为中国早期地震工作的发展起到了良好的推动作用。由于种种客观原因,地震预报实验场的多数预想目标未能达成,发展受到了阻碍。最近几年,实验场重新受到重视,并更名为"地震科学实验场"。结合目前地震学发展的前沿和防震减灾事业的实际需求,本文提出增加"地下云图"作为实验场的新方向。利用高重复性、环境友好、安全性高的气枪震源,持续激发地震信号,实现对地下介质速度变化的连续监测;结合背景噪声成像获得的高分辨率3维地壳结构,构建4维(三维空间+一维时间)地下结构成像。"地下云图"可以反映地下速度和应力变化,为全国范围的地震监测预测提供新的业务手段,推动地震预测从经验预测到物理预测的转换。  相似文献   

地震台智能电源Android平台控制系统     

石磊  刘静  李凤  尹宏伟 《地震地磁观测与研究》2018,39(3):218-222

针对无人值守地震台因供电故障造成的观测数据质量问题，现阶段GPRS在地震台站的应用大多以手机短信呈现，无良好的可视化操作界面，设计开发一种底层基于STM32单片机，以GPRS为数据传输方式，Android手机APP为监控界面的智能电源控制系统。通过在河北省地震局石家庄中心台下属的深州郭家庄地震台进行应用，证明该电源控制系统能够保证观测设备的稳定运行，并为设备维护提供了保障和依据。  相似文献   

基于LiDAR-DP的机载激光雷达数据处理     

刘华娇  李兵  邵红霞 《地理空间信息》2019,17(3)

基于国产机载LiDAR数据处理软件LiDAR-DP,总结了机载LiDAR数据处理的技术流程,并根据该流程对LiDARDP的相关功能进行了研究。利用LiDAR-DP对实际数据进行了DEM生产试验,并与同类商业软件进行了功能对比。结果表明,LiDAR-DP是一款优秀的国产机载LiDAR数据处理软件,完全能满足DEM的生产需求。  相似文献   

Fully coupled elastoplastic hydro-mechanical analysis of unsaturated porous media using a meshfree method     

Omid Ghaffaripour  Golnaz A. Esgandani  Arman Khoshghalb  Babak Shahbodaghkhan 《国际地质力学数值与分析法杂志》2019,43(11):1919-1955

This paper presents the first application of an advanced meshfree method, ie, the edge-based smoothed point interpolation method (ESPIM), in simulation of the coupled hydro-mechanical behaviour of unsaturated porous media. In the proposed technique, the problem domain is spatially discretised using a triangular background mesh, and the polynomial point interpolation method combined with a simple node selection scheme is adopted for creating nodal shape functions. Smoothing domains are formed on top of the background mesh, and a constant smoothed strain, created by applying the smoothing operation over the smoothing domains, is assigned to each smoothing domain. The deformation and flow models are developed based on the equilibrium equation of the mixture, and linear momentum and mass balance equations of the fluid phases, respectively. The effective stress approach is followed to account for the coupling between the flow and deformation models. Further coupling among the phases is captured through a hysteretic soil water retention model that evolves with changes in void ratio. An advanced elastoplastic constitutive model within the context of the bounding surface plasticity theory is employed for predicting the nonlinear behaviour of soil skeleton. Time discretisation is performed by adopting a three-point discretisation method with growing time steps to avoid temporal instabilities. A modified Newton-Raphson framework is designed for dealing with nonlinearities of the discretised system of equations. The performance of the numerical model is examined through a number of numerical examples. The state-of-the-art computational scheme developed is useful for simulation of geotechnical engineering problems involving unsaturated soils.  相似文献